Seekins IRMT-R Upper (FA, no BCG/CH), with multiple rails.
Willing to part out or sell as a lot.
1 - IRMT-R upper stripped w/ Forward Assist, stripped and painted countless times, functioned fine when last assembled but could use a complete strip and ano or strip and paint
1 - 15” MLOK MCSR V2 Rail black ano
1 - 12” MLOK MCSR V2 Rail black ano w/ wear
Retail on each rail is about $240, call it $150 per rail, $250 retail on upper, call it $150 for the extra work you’ll want to put into it.
Missing bag of screws for rail set, seekins will send replacements free usually or pick up at ACE for $0.50 (8, 8-32x3/8”)
And maybe:
1 - 12” BAR rail (quad rail, MCSR pattern) - FDE painted with some old ceramics competitor that is now defunct, enamel based and has streaks.
Edit: As the upper classifies as a component- Upper to ID residents only, if I’m wrong let me know.
Technically you can put these rails on anything that accepts a separate MCSR barrel nut so they should be good to go to any state.
Seekins IRMT3/MCSR upper & Rails
Forum rules
It is every member's responsibility to know and follow all local, State & Federal laws regarding the sale or transfer of firearms/parts/etc...in their respective jurisdictions. No illegal activity will be allowed here on SGT. This is a zero tolerance rule and will be strictly enforced. Violators will be banned permanently. Proceed solely at your own risk.
It is every member's responsibility to know and follow all local, State & Federal laws regarding the sale or transfer of firearms/parts/etc...in their respective jurisdictions. No illegal activity will be allowed here on SGT. This is a zero tolerance rule and will be strictly enforced. Violators will be banned permanently. Proceed solely at your own risk.
-
- Jr. Member
- Posts: 46
- Joined: Wed Mar 29, 2017 6:58 pm
- City: Coeur d'Alene
- State: Idaho
- Favorite Firearm: H&K 416